100 metre Wireless DA600+ Panic Alarm with Buzzer & Flashing Strobes

A simple & quick to fit 100 metre Wireless DA600+ Panic Alarm with a built in Buzzer & Flashing Red or Blue Strobe Light, designed to help protect Staff & Vulnerable People in the event of Security & Medical Emergency.

Please Note: Could be supplied with No Buzzer (for applications wanting a Silent Panic Alarm).

Ideal for many applications where there is a manned central office with other staff working alone in nearby rooms & offices, examples would be:

• Interview Rooms.
• Doctor Surgeries
• Retail Operations.
• Workshops.
• The applications are endless!!

How it Works:

The small battery powered Wireless Panic Button can be located up to 100 metres (open air) away from the location of the control panel assembly, this equates to 30 - 50 metres in most environments (an additional 1000 metre can be gained by simply adding a signal repeater, our reference 004-2910).

If the Panic Button is pressed a wireless signal will activate the control panel assembly which will in turn activate a loud built in Buzzer and Flashing Strobe Red or Blue Strobe LED Light for 5 minutes (this duration can be reduced or lengthened upon request, contact us to discuss). The Buzzer & LED can be reset by a member of staff before the 5 minutes simply by turning the power ON & OFF (this can be made more complicated if required).

Simple Installation:

Installation could not be more simple, many members of staff could fit the system in a short length of time, the process is:

1. Mount the Panic Button ON/Under a Desk or on a Wall (double sided tape).
2. Mount the Control Panel Assembly with 4 x Screws (inside or outside).
3. Plug in the attached 3-pin Transformer into a standard wall socket (in a dry location).
4. Test.

Variations:

This simple Wireless Panic Alarm can be altered & adjusted to suit many different applications, some of the options include:

• Additional Panic Buttons (our reference 004-2940).
• Signal Repeater (our reference 004-2910).
• Additional Control Panel Assemblies, our ref
• Red or Blue Strobes (select on the drop down at the top of this page).
• Shorter Duration for the Buzzer & LED Strobe (simple adjustments).
• Latching Duration for the Buzzer or LED Strobe (will require additional components, please contact us to discuss).
• Large Green Push Button (our reference 006-2030), Red also available.
• Large Outdoor Wireless Siren (our reference 004-2810).
• Up to 4 LED Indicators on the Control Panel Assembly (if you are using more than one Panic Button, allowing you to identify which Panic Button has been activated (requires additional parts, please contact us to discuss).

A simple Wireless Panic Alarm suitable for many applications, if you cannot see the variation above to suit your needs, please contact us to discuss as we can make many alterations.

• 1 x Control Panel Assembly with Buzzer & Flashing Red or Blue LED Strobe Light.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 1 x Wireless Panic Button.

Wireless Panic Button:

• Wireless Range: 100 metres (line of sight).
• Power Supply: 1 x Lithium CR2450 3v Coin Cell.
• Size: 60mm (D) x 25 (H) mm.
• Installation Method: Double Sided Tape.

Control Panel Assembly:

• Size: 225 x 190 x 67 mm (not including Strobe).
• Box Material: Plastic.
• Box Mounting Method: Handy Mounting Lugs with Pre-drilled Holes.
• Wireless Operating Range: 100 metres (open air).
• Buzzer: (approximately 80 Decibel).
• Flashing Strobe: Blue or Red.
• Duration of Buzzer: 5 minutes (can be altered, please contact to discuss).
• Duration of Flashing: 5 minutes (can be altered, please contact to discuss).
• Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
• Back Up Battery: No (but available upon request).
• Weatherproof: Yes.