300 metre Wireless SB2 DA600+ Panic Alarm

Wireless SB2 DA600+ Panic Alarm, designed to help protect your staff from vulnerable situations, ideal for applications such as:

• Reception Areas.
• Interview Rooms.
• Retail operations.
• Lone Working.

Compatible with all DA600+ products !!

The battery powered Wireless Panic Button can be wall mounted, or fitted underneath or on top of a desk.

The Wireless range between the Panic Button & Receiver is an impressive 300 metres (line of sight) which can be increased by 900 metres by using a signal repeater (part number 004-2910). 

In the event of the Wireless Panic Button being activated, the Receiver will Activate & Latch ON the 100 Decibel Siren/Buzzer (connected by short length of cable) until a member of staff presses the Reset Button (ideal for locations where there is a very slight chance that the location of the Siren may be unmanned for short periods occasionally). A most important feature !!

The Receiver will also indicate which of the four channels has been activated allowing staff to identify where the help is required. 

Additional Wireless Panic Buttons (part number 004-2940) can be added (up to a maximum of 128 over 4 channels) to the system allowing you to protect multiple rooms.

The 4-channel Receiver is powered by a plug in transformer.

Simple & quick to fit Alarm System suitable for Security & Medical applications, No Expensive Installation Costs !!

• 1 x 4-channel Wireless Receiver.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 1 x Wireless Panic Button.
• 1 x Latched Relay Siren Kit.

Receiver Specification:

• Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Power Input: 12 - 15 v DC.
• ON/OFF Button: Yes.
• Built in Siren: Yes (adjustable volume).
• Connected Siren: Yes (100 Decibel, 3-tones to choose from).
• Channels: 4.
• Max sets of Panic Buttons per Channel: 32.
• Output Voltage: 12 - 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Range: 300 metres (can be increased to 1200 metre line of sight by adding a signal repeater).

Push Button Specification:

• Wireless Range: 300 metres (line of sight).
• Power Supply: 1 x Lithium CR2450 3v Coin Cell.
• Size: 60mm (D) x 25 (H) mm.
• Installation Method: Double Sided Tape.

Latched Relay Siren Specification:

• Siren Level: 100 Decibels.
• Siren Duration: Constant (until switched off by staff).
• Reset Switch: Yes (located on latched siren kit).
• Size: 115 (L) x 65 (W) x 65 (H) mm.