Additional H/D Push Button & Wireless 'S' Range Transmitter

Additional Heavy Duty Push Button & Wireless 'S' Range Long Range (900 metre) Transmitter for use with the 'S' Range Bells Systems.

The Push Button is connected to the Battery Powered Wireless Transmitter by 3-metres of Bell Cable (which can be lengthened or shortened to suit each installation).

The transmission range between the Battery powered Wireless Transmitter and the 'S' Range Receivers is an impressive 900 metres (line of sight), which equates to around 400 - 600 metre in most applications, this can be at least doubled by adding the Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Transmitter would be paired into a suitable 'S' Range Wireless Receiver.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Pair the Transmitter into a suitable 'S' Range Wireless Receiver.
2. Mount the H/D Push Button.
3. Mount the Battery Transmitter & Box (4 x Screws).
4. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the application).

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x H/D Push Button.
• 1 x S Transmitter & Mounting Box.
• 1 x 3 metre Bell Cable. 

Wireless Transmitter:

• Wireless Range: 900 metres (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 90 x 40 x 15mm.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 195 (L) x 90 (W) x 45 (D) mm.
• Internal Size: 133 (L) x 83 (W) x 35 (D) mm.

Push Button Specification:

• Size: 85mm (L) x 40mm (W) x 40mm (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.