Domestic Wall Anchor Kit (including padlock)

Compact sized Domestic Security Wall Anchor & Padlock Kit, ideal for fitting onto the wall of a shed, garage or workshop to help secure your valuable assets.

Please Note: Only One Left !!

This anchor kit can also be used effectively as a ground anchor and is supplied with a quality long shackle padlock.

Often used with our alarmed locks or the more traditional security chains and padlocks, ideal size for fitting onto a shed, garage or workshop wall, to help secure property ranging from tools, machinery & push bikes. 

Supplied with a set of unique secure fixings, where a ball bearing is driven into the head of the bolt when once the installation is complete, this prevents the bolt from easily being undone.  

 A very simple and affordable addition to your Home & Business Security.

• 1 x Steel Anchor.
• 2 x Backing Plates.
• 2 x Secure Fixing Kits.
• 1 x Long Shackle Padlock & 2 Keys.

• Size: 105 (L) x 50 (W) x 55 (H) mm.
• Wall Thickness: 4 mm.
• Material: Steel.
• Finish: Black Powdercoat.
• Secure Bolt Kits: 2.
• Chain & Lock Clearance: 17mm.
• Package Weight: 600 grams.

Installation Instructions (Concrete or Brick):

1. Using the anchor plate as a template, drill 2 pilot holes using a 6mm diameter drill piece.
2. Remove the anchor plate, and re-drill both of the holes out to 10mm diameter to a depth of 55mm.
3. Remove the threaded bolts from the two anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten into the anchor fixings.
4. Insert the two anchor fixings into the pre-drilled holes.
5. Holding the plate firmly against the wall or floor, tighten the bolts using a hexagonal head tool (not supplied).
6. Once fitted and fully checked, firmly press the cover onto and over the bracket, this protects the head of the mounting screws.

Installation Instructions (Shed/Timber):

1. Using the anchor plate as a template, drill 2 pilot holes using a 6mm diameter drill piece through the side wall or floor.
2. From the outside the backplate can be recessed into the holes of the wood using a 12mm drill to a depth pf 10mm.
3. Remove the threaded bolts from the two anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten into the anchor fixings.
4. Insert the two anchor fixings into the pre-drilled holes.
5. Holding the plate firmly against the wall or floor, tighten the bolts using a hexagonal head tool (not supplied).
6. Once fitted and fully checked, firmly press the cover onto and over the bracket, this protects the head of the mounting screws.