Photo Cells Buzzer Entry Alert

Photo Cell Buzzer Entry Alert

006-3170-00

New

Photo Cell Buzzer Entry Alert Kit for use to monitor the open entrance of a typical Warehouse, Factory or Retail business (power is required on one side). The 40 Decibel Buzzer connected to the Photo Cells will operate whenever the Beams are activated by a Person or Vehicle passing through, ideal as a Visitor Alert or Security & Safety Barrier.

 

More details

97,93 €

(including vat)
In stock, order now for fast delivery

100% secure payment

Photo Cell Buzzer Entry Alert Kit for use to monitor the open entrance of a typical Warehouse, Factory or Retail business (power is required on one side).

The 40 Decibel Buzzer connected to the Photo Cells will operate whenever the Beams are activated by a Person or Vehicle passing through, ideal in many applications that require an accurate invisible Beam (maximum distance 12 metres).

Uses may be:

  • Visitor Alert (covering an Open Warehouse or Factory Entrance).
  • Visitor Alert (in a Retail operation that has an Open Entrance).
  • Security Alert (for no access areas).
  • Health & Safety Barrier (for restricted locations within a building).

The kit is supplied with the following:

  • 1 x set of Weatherproof Photo Cells.
  • 1 x 40 Decibel Buzzer.
  • 1 x 3 -pin Plug in Transformer.

How it Works !!

The weatherproof Photo Cells are supplied as a pair which need to be mounted either side of a suitable Entrance in a position where they are facing each other (maximum distance 12 metres), one Photo Cell is powered by the Plug in Transformer (supplied), whilst the second Photo Cell is powered by a Battery (supplied) for easier Installation.

Connected to the powered Photo Cell (by a short length of cable) is the 40 Decibel Buzzer.

The 40 Decibel Buzzer connected to the Photo Cells will operate whenever the Beams are activated by a Person or Vehicle passing through, ideal in many applications that require an accurate invisible Beam (maximum distance 12 metres) monitoring an Open Entrance.

Please Contact Us for any Advice !!

  • 1 x Set of Photo Cells.
  • 1 x 3-pin Plug in Transformer.
  • 1 x 40 Decibel Buzzer.

Photo Cells:

  • Working Voltage: 12~24VAC/DC or 3V Dry Battery.
  • Working Current(24VDC):emitter: =8mA receiver: =40mA.
  • Photocell Wavelength: 940nm.
  • Angle of opposite emission: =±5º.
  • Receiver range: =12m.
  • Internal Rotation system adjusted Angle: 0~180 º.
  • Working temperature: -20º~+60?.
  • Relay contact loading capacity: 1A/30VDC.
  • Waterproof grade: IP54.
  • Size: 128*50*28mm.

Power Supply:

  • Power Supply: 3-pin Plug in Transformer.
  • Voltage: 12v DC.
  • Output: 1 amp.

Buzzer:

  • 40 Decibel.
  • Voltage: 12v DC.