10 metre KP Water Detecting Rope & Control Panel (008-0410)

KP Professional Water Detecting Rope System which includes a 10 metre Water Detecting Rope and an adjustable Control Panel which will latch a N/O connection to N/C whilst any water is being detected.

The 10 metre length Active Detecting Rope is laid across a vulnerable location (floor or ceiling) allowing you to monitor larger areas than using a single probe, it is also supplied with an additional 2 metres of non active cable going back to the control panel. 

The Control Panel is powered by a 3-pin Plug in Transformer (although direct power from an existing control panel could be used) and has a Normally Open Volt Free Output, when water is detected this N/O Output Relay will close for the duration that water is being detected.

This Output Relay can be used to activate Buzzers, Sirens, Flashing Lights or Telephone Diallers.

For wider areas we can offer 30 metre Water Detecting Ropes.

• 1 x Water Detecting Rope Control Panel.
• 1 x 3-pin Plug in Transformer (2-pin available upon request).
• 1 x 10 metre Water Detecting Rope.
• 11 x Self Adhesive Clips (for rope).

Control Panel:

• Voltage Input: 12 - 60v DV.
• Output: N/O going N/C (for duration whilst the detecting rope is damp).
• Size: 110 (L) x 37 (W) x 50 (D) mm.
• Adjustable Sensitivity: Yes (4 settings).
• Mounting Methods: Din Rail or Double Sided Tape.

Rope: 

• Connection Method to Control Panel: 2 x terminal screw connections.
• Length of Active Water Detecting Rope: 10 metres.
• Diameter of Rope: 10 x 5 mm.
• Length of Non Water Detecting Cable: 2 metres.
• Method to mount Rope: 11 x Self Adhesive Clips.