Smart Battery Wireless Siren Alarm & Water Sensor.
For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick alarm to install (in any location). Supplied with a Wireless Water Sensor & Remote Control, can be used as a Flood Alarm or as a base to build a more comprehensive Flood & Intruder Alarm System. Operates on 868 Mhz.
Recipient :
* Required fields
or Cancel
005-3420
New
For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick alarm to install (in any location). Supplied with a Wireless Water Sensor & Remote Control, can be used as a Flood Alarm or as a base to build a more comprehensive Flood & Intruder Alarm System. Operates on 868 Mhz.
Please note: out of stock
This product is no longer in stock
Availability date:
For locations with no easy or safe access to a power supply, this Battery Powered Wireless Siren & Flashing Strobe doubles up as the Alarm Control Panel, making it an easy & quick Alarm to install (in any location), operates on 868 Mhz.
Supplied with a Wireless Water or Flood Sensor & Remote Control, can be used as:
The Alarm is operated using Remote Control (supplied) or additional Remote Controls or Wireless Keypads.
This Wireless Water Detector is designed to monitor for Water Leaks & Floods !!
The battery powered transmitter should be mounted in a position above the potential water leak, with the Water Sensor/Probe located in a position very close to the most likely location that water would collect following a leak (it is attached to the transmitter by a 220 mm cable, which could be extended if needed).
The transmitter is installed using small screws or double sided tape (both supplied), the sensor is mounted using a double side strong adhesive pad (supplied).
The transmitter is powered by 2 x AAA batteries (supplied), and would last between 1 - 2 years in most applications, there is a built in Low Battery Warning (slow red flashing LED on the transmitter) to inform the home owner that the batteries need replacing.
The Wireless Transmitter has a very impressive wireless range of 200 metres (line of sight) back to the Siren.
The Wireless Remote Control, for arming and disarming your Wireless Smart Alarm (from up to 50 metres away), it can carry out 3 functions with this system:
The Siren/Control Panel is powered by 4 x D Cell Batteries (supplied), which will last approximately 2 years, makes the installation very quick, easy & safe (optional plug in transformer available for locations that have easy and safe access to a power supply socket).
When activated it has twin Sirens supplying 120 Decibel & bright Flashing Strobe Lights, the duration of these can be adjusted between 1 - 10 minutes during installation.
The Siren has other features including:
Also available is a matching Dummy Siren Box, normally fitted to the rear of the property !!
Internal Wireless Magnetic Door/Window Contact, designed to help protect all types of opening Door & Windows, for use with our Smart Wireless Alarm Systems.
External Wireless Magnetic Door/Window Contact, designed to help protect all types of opening Gates & External or Damp Door & Windows, for use with our Smart Wireless Alarm Systems.
Internal Wireless Smart Alarm PIR, detects people from up to 15 metres distance & 110 degrees angle, with a wireless transmission range of 150 metres (line of sight) back to the Control Panel.
Wireless Remote Control, for arming and disarming your Wireless Smart Alarm, from up to 50 metres away.
Wireless Water Detector, designed to monitor for Water Leaks & Floods, works in conjunction with all of our Wireless Smart Alarm Systems.
Additional Wireless Security Floor Pressure Mat, designed to be placed underneath a doormat, when anyone stands on the doormat, a wireless signal is transmitted back to a Wireless Smart Alarm Control Panel, the panels can be programmed to chime or go into a full alarm mode.
Dummy Alarm Siren & Flashing LED, exactly matching the fully operational Wireless Smart Alarm Siren, ideal addition to any Alarm Installation, or used as a simply deterrent on any building.
Wireless Smart Alarm Vibration Sensor, designed to detect Door & Windows being forced open, activates the Alarm before entry has been achieved, for use with our Smart Wireless Alarm Systems.
Unique Wireless Siren Monitoring Sensor, designed to monitor existing Smoke, Gas & Carbon Monoxide Alarms, ideal for ensuring that the correct & legal Sensors are being used whilst still being able to connect it your your Wireless Smart Alarm System.
Battery powered Wireless Keypad used to Arm & Disarm all of the Wireless Smart Alarm Systems, ideal for applications with multiple users, or where using a remote control is not practical (only three left in stock).
Wireless Roller Shutter Doors or Gate Contact, for use with our Smart Wireless Alarm Systems.
Battery powered External Wireless Pet Friendly Wireless PIR for use with the Wireless Smart Alarms, for applications where False Alarms needs to be minimized.
Outdoor Wireless PIR for use with the complete range of Smart Wireless Alarms, supplied with a protective rubber hood which results in a tighter detection pattern helping it avoid false alarms from small animals.
Wireless Siren & Control Panel:
Flood or Water Leakage Sensor;
Remote Control:
Siren Battery Level Test: