1200 metre S Range DA600+ Wireless Door Alert with Flashing LED

1200 metre Wireless DA600+ Door Alert with Blue Flashing LED designed to monitor a closed door being opened.

Supplied with a:

• 1 x Battery Powered Wireless Door Contact.
• 1 x 4 channel Wireless Receiver.
• 1 x Signal Repeater.
• 1 x Blue Flashing LED with 3 metres of Cable.

In the event of the Door being opened, the Internal Receiver will chime (adjustable volume) together with activating the Blue Flashing LED for a duration of 10 - 60 seconds or 5 minutes (or until reset on the receiver).

The LED is connected to the Receiver via 3 metres of Bell Cable, which can be lengthened upon request.

Additional Door Contacts can be added including the standard 300 metre model (004-2820) supplied within this kit or the long range 700 metre Solar Powered model (004-3800).

Door Contact & Repeater:

This system is supplied with a Signal Repeater which increases the working range from 300 metres (line of sight) to 1200 metres (line of sight). The signal repeater is powered by a plug in transformer and needs to be fitted within 100 - 300 metres from the door contact.

The Signal Repeater needs to be fitted into an Internal location or inside a weatherproof container (not steel).

The Magnetic Door Contact is powered by 2 x AAA batteries which would last between 1 - 2 years in most applications.

They are fitted using double sided tape and a couple of small screws in some applications, and would be fitted onto a door and door frame in such a position that both parts are within 1 - 8 mm from each other when the door is closed. The normal location would be on the top ledge about 1/3rd in from the hinge. 

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

• 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
• Adjustable 12v DC Outputs (often used with sirens & flashing lights).
• ON/OFF Switch.
• Volume Control.
• Will work with up to 128 sets of Sensors.
• Optional Reminder Bleeps.
• Exit Delay Option.

• 1 x Wireless 4 channel Receiver.
• 1 x Wireless Repeater.
• 2 x 3-pin Power Supplies (2-pin available upon request).
• 1 x Set of 300 metre Wireless Magnetic Contacts.
• 1 x Blue Flashing LED with 3 metres of Bell Cable.

Receiver:

• Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Supply: 15v DC 1amp (3-pin plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Sensors per Channel: 32.
• Maximum sets of Sensors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 300 metres (line of sight).

Signal Repeaters:

• Wireless Range: 900 metres (line of sight).
• Power Supply: Plug in 3-pin Transformer (2-pin available).
• Frequency: 433 Mhz.
• Size: 160 (w) x 160 (h) including Aerial x 55 (d) mm.

Door Contact:

• Size of Switch: 90 x 28 x 15 mm.
• Size of Magnet: 90 x 13 x 8 mm.
• Installation Method: Double Sided Tape (supplied) & 2 x Screws (optional).
• Transmission Range: 300 metres (line of sight).
• Contact Distance: Approximately 10 mm.
• Batteries: 2 x AAA Batteries.
• Battery Life: 1 - 2 years (depending on usage).

Flashing LED:

• Colour: Blue.
• Voltage: 9 - 12v DC.
• Diameter: 75 mm.
• Depth: 55 mm.
• Fixing Methods: Screws or Double Sided Tape (supplied).
• Cable Length: 3 metres.