1B-100 Solar Wireless DA600+ Perimeter Alarm with 4G Dialler

This Wireless Perimeter DA600+ 4G Alarm System is supplied with the following parts (but can also be expanded in many ways to suit different applications):

• 1 x set of Long Range Solar Powered 1B Beams.
• 1 x Wireless Receiver.
• 1 x KP9 4G Auto-Dialler (with remote controls).

Compatible with all DA600+ products !!

A Perimeter Alarm System to help you Monitor & Secure your Home & Business, ideal for DIY Installation (but can be expanded even more if required).

How it Works:

The set of 1B Beams are mounted to cover your Perimeter (or vulnerable part of your Perimeter), the Receiver & 4G Dialler are normally located inside your Home, Garage, Office (or any nearby Internal location with access to power and a mobile phone signal).

If a person or vehicle passes through the set of 1B Beams (when the Dialler is Armed), the Internal Receiver will Chime, the 4G Auto-Dialler will activate a built in Siren and start to contact Key-holders by Phone & Text.

• Battery Powered with Built in Solar Charging: (making for easy installation).
• Dual Detection Technology: (prevents false alarms from small animals and moving debris).
• Up to 100 metre Detection: (can be used closer).
• Impressive 900 metre Wireless Range (can be doubled by adding a signal repeater). 
• Quality Build.
• Supplied with Wall & Pole Mounting Brackets.
• Test Display & Eye Sighting: (for aid installation).
• Top up charging Ports.
• Option Test Beep (which can be silenced).

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by.   

 

They also have an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. You can also add an separate Solar Panel on any given Beam if it helps the charging or positioning options.

They are very easy to install as they have a display screen and a sighting lens to help installation.

KP9 4G Auto-Dialler:

The KP9 4G Auto-Dialler which is connected to the Wireless Receiver and communicates through mobile phone networks, a nano sized SIM Card needs to be fitted (not supplied), you can use either PAYG or Contract (no data is required).

The 4G Dialler operates on the mobile phone networks and is packed full of features normally only associated with much more expensive systems including:

• 4G (but also operates on 3G & 2G).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Simple Plug in Power Supply with Back up Battery.
• Transformer Rating: 12v DC 1 amp.
• Can be used with a Wireless Sirens (H/Duty).
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Controls (2 supplied but more can be added).
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
• 2 x Wired Input Zones.
• 95 x Wireless Zones.
• Built in Power Failure (optional).
• Built in Temperature (optional).
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• Optional APP (iOS or Android).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).

The secret to using a 4G Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, if the Dialler is Armed the Alarm is ON, if Disarmed the Alarm is OFF (although you can still choose to use a chime on the wireless receiver which is a very handy alert).

The Dialler can be Armed & Disarmed by the following methods:

• Built in Keypad.
• Remote Control.
• Text Message.
• Built in Timer.

The GSM Control Panel can also in different ways helping you a return on the investment, examples below:

• Wireless Internal Burglar Alarm.
• Wireless Smoke Alarm.
• Temperature Monitor.
• Power Failure Monitor.
• Door Bell.
• 2-way Communication.
• Water & Flood Monitor.

You can expand this Perimeter Alarm System in many ways including: 

• Additional Perimeter 1B or 2B Beams (2 x sizes).
• Wireless Outdoor PIR's (solar or battery).
• Door Contacts.
• Gate Contacts.
• External Wired & Wireless Sirens.
• Internal Sirens & Buzzers.
• Speech Alerts.
• Relays (for lighting).
• Flashing LED's.

*You can use up to 128 sets of Wireless Detectors with this single Alarm System*

If you require advice when building your system, please contact us for Friendly, No Obligation Advice !!

Wireless Receiver Specification:

• Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Input: 12 - 15v DC 1 amp.
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Channels: 4.
• Max sets of Beams per Channel: 32.
• Output Voltage: 12 - 12v DC.
• Output Voltage Duration: 2 seconds to 10 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Relay Output Type: Momentary N/O or N/C.

KP9 GSM Dialler Specification:

• 95 Wireless Channels (can be used with additional internal accessories).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Transformer Rating: 12v DC 1 amp.
• Back up Battery: Yes.
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
  • Not in Use.
  • Doorbell.
• 2 x Wired Input Zones.
• Built in Power Failure (adjustable 0 - 99 minutes).
• Built in Temperature (optional).
• Optional Wireless External Sirens. 
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).
• Size: 190 (W) x 130 (H) x 25 (D) mm.
• GSM Frequency: FDD-LTE: B1/3/5/7/8/20 TDD-LTE: B38/70/B41 WCDMA: B1/5/8.
• GSM: 900/1800 (2G, 3G & 4G Networks).
• This Alarm operates on 2G, 3G & 4G Networks !!
• Wireless Accessories Frequency: 433.92 Mhz.
• Digital Output: N/O or N/C Dry Contacts (3A/240 AC).
• Sim Card Size: Nano Size.
• Built in Temperature Monitor: Yes (-20 - + 60 C).
• Back Up Battery: 3.7v-900mAH Li-ion Rechargeable.
• Colour: White.
• Push Buttons: Touch.
• Android APP: Yes.
• iOS: Yes.

Beam Specification:

• Size: 340 (H) x 123 (W) x 45 (D) mm.
• Power Supply: Re-chargeable AA Batteries.
• Mounting Methods: Wall or Pole.
• Detection Range: 100 metres.
• Transmission Range: 900 metres (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Qty of Detecting Beams: 1 set.
• Protected Height: 
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Easy Programming Method of Beams to Receiver:

1. Turn On Beams (switch on rear).
2. Mount the Beams.
3. Line up By Eye, String Line etc.
4. Put the relevant Receiver into Learn Mode.
5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
7. Take the Receiver out of learn mode.
8. The system is now ready.

GSM Auto-Dialler Programming:

• Best carried out after the Beams are programmed to the Receiver (see above).
• Connect Receiver to Dialler using Bell Cable (often done by us before despatch).
• Insert SIM Card.
• Connect and plug in the Power Supply.
• Turn ON (switch in back).
• Use Keypad to carry out the relevant programming.