Warehouse Special Long Range Wireless Bell System

Warehouse Special Long Range (800 metre) Wireless Entry Bell System supplied with a Heavy Duty Push Button (with please ring etched onto it) and a Loud Bell.

Out of Stock, please Click Here for a replacement Model !!

Ideal for many applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Transmitter and plug in Receiver is an impressive 800 metres (line of sight).

Push Button:

The Push Button (with 'Please Ring' etched onto it) would be fitted onto the most suitable location (on the outside of a warehouse or gatepost ) and connected to the battery powered Wireless Transmitter by 3 metres of bell cable (which can be lengthened or shortened upon request).

Wireless Transmitter:

The battery powered Wireless Transmitter is fully weatherproof and would normally be located on the back of the gate post or on the inside of the building, depending on where the Push Button was fitted. This allows the transmitter to be fitted into the best location for wireless transmission and away from any possible vandalism.

Wireless Receiver:

The Wireless Receiver plugs into a wall socket using a standard 3-pin transformer and can be located up to 800 metres (line of sight) away from the Wireless Transmitter, this Receiver has a built in Chime which is adjustable from OFF to 85 Decibel (ideal for an office).

Bell:

The loud (85 decibel) Bell is connected to the Internal Receiver by 3 metres of Bell Cable (which can be lengthened upon request) and is suitable for installing both Inside or Outside of a building. The duration of the Bell is adjustable, but is normally set to 10 seconds.

Operation:

When a visitor presses the Push Button, the Chime on the Receiver will activate at the volume level it has been set on, together with the Loud Bell ringing for the set duration.

Optional Extras Available:

You can add many different extras to this system including:

• Plug in Receivers (for different offices or buildings).
• Portable Pagers (ideal for night security).
• Bells, Sirens or Flashing Lights.
• Wireless Alarm Detectors (should you want to add some security to some parts of your Perimeter or Entrance).

A very popular Bell System, if you have any questions about building a system to suit your application, please contact us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x 4-Channel Receiver & Power Supply.
• 1 x Weatherproof, Wireless Transmitter & Battery.
• 1 x Heavy Duty Push Button (with the words 'Please Ring' embossed onto it).
• 3 x metres Bell Cable (for the push button).
• 1 x Bell.
• 1 x Magnetic Contact (optional extra for use on gates).
• 1 x Manual.

Wireless Receiver:

• Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
• Wireless Range: 800 metres, (this is line of sight).
• Size: 95 (H) x 150 (W) x 35 (D) mm.
• Available Channels: 4.
• Maximum Number of Detectors: Unlimited.
• Volume Control: Yes (off to 85 decibel).
• ON/OFF Switch: Yes.
• Channel Audible Alerts: 4 (Classical, Westminster Chime, Ding Dong, Whistle).
• Visual Alert: Yes (four LED Lights).
• Output Relays: Yes (4).
• Output Relay Type: (N/O - COM - N/C).
• Output Relay Rating: 24v DC - 3amp.
• 12v Out Put: Yes (400mA max).
• 12v Output Duration: 1 second, 10 seconds, 60 seconds, 10 minutes.
• 12v Output Channels: 1 - 2 - 3 - 4 (selectable).
• Delay Exit: 5 minutes (selectable for each channel).
• Reminder Bleep: Yes (beeps every 15 minutes after an activation if required, selectable).
• Colour: White.

Wireless Transmitter:

• Size of Transmitter: 85 x 50 x 25 mm.
• Mounting Method of Push Button: Rear Mounting Bracket.
• Size of Magnet: 50 x 15 x 10 mm.
• Mounting Method of Magnet: 2 x Screws (included).
• Power Supply: 1 x CR-2 Lithium Battery (supplied).
• Battery Life: 12 - 24 months (normal operation).
• Transmission Range: 800 metres (line of sight).
• Transmission Frequency: 433 Mhz.
• Programming Method: Internal Dip Switches (very simple).
• Available Channels: 4.
• Maximum number of Push Buttons available per System: Unlimited.
• Input Relays: N/O or N/C.
• Weatherproof: Yes.

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.

Push Button Specification:

• Size: 85mm (L) x 40mm (W) x 40mm (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.