Reduced price! 2B Solar Wireless Perimeter Alarm System with additional Power Packs

2B-100 Perimeter DA600+ Alarm with Receiver & 2 x Power Packs

Ultra Secure

004-3490

New

Long Range 2B Solar Powered Wireless DA600+ Perimeter Alarm System supplied with 2B Wireless Beams, 1 x 4-channel Wireless Receiver & 2 x Power Packs

 

More details

569,90 €

(including vat)

593,64 €

-4%

Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Long Range 2B Solar Powered Wireless DA600+ Perimeter Alarm System supplied with a set of 2B Wireless Beams, 1 x 4-channel Wireless Receiver & 2 x Power Packs.

Compatible with all DA600+ products !!

The operational range between the Receiver & Beams is 900 metre (line of sight) & the detection range is 100 metre, ideal to help you protect your Family, Home & Business, designed for simple DIY Installation.

Rechargeable Power Packs:

These Power Packs are designed for helping to power and maintain the Solar Beams in either:

  • Very busy locations (hundreds of activations per day).
  • Dark locations such as:
    • Under a large Tree.
    • Behind a large North Facing Wall.
    • Inside the Entrance to an Open Barn.
    • Inside a fully enclosed Building.

The Power Pack will operate the Beams for approximately 750 activations before needing to be recharged, the Beams will also still have their built in Batteries and Solar Panels.

When the Power Pack needs charging, you simply unclip and remove it from the weatherproof container (no tools required) and take it to the charger (3-pin charger supplied), whilst the Power Pack is being charged the Beams will operate normally being powered by the Internal Batteries.

For locations inside buildings near to a power supply, you could even keep the Power Pack permanently connected to the Charger.

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

  • 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
  • Adjustable 12v DC Outputs (often used with sirens & flashing lights).
  • ON/OFF Switch.
  • Volume Control.
  • Will work with up to 128 sets of Detectors.
  • Optional Reminder Bleeps.
  • Exit Delay Option.
Wireless Beams: 
These impressive Solar Powered 2B Wireless Perimeter Beams (often called laser beams) are packed with impressive features listed below: 
  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • 2 x sets of Detection Beams.
  • Dual Detection Technology: (prevents false alarms from small animals and moving debris).
  • 100 metre Detection: (covers more are with less detectors).
  • Impressive 900 metre Wireless Range: 
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Lights: (for easy installation).
  • Top up charging Ports.

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. There are a pair of detectors on each size of Beam, so the 2B-100 have two pairs whilst the 3B-100 would have three pairs, each pair of detectors work independently of each other resulting in the 3B-100 Beams having three chances to detect an Intruder.   

They are very easy to install as they have a built in Red Glow Light (for easy lining up).

These Beams can be set to operate a small siren for a few seconds when activated (pressing ON/OFF button 3 - 6 times, or OFF by pressing the same ON/OFF button 7 or 8 times).

You can use up to 128 sets of Beams with this Receiver & 32 sets should you decide to add a Solar Wireless Siren (part number 004-2810).

Operating Range:
The Wireless operating range between the Beams & Receivers is 900 metres (line of sight) which can be doubled by using the signal repeater (part number 004-2910).
Auto-Diallers:
You can add a Hard Wired or GSM Auto-Dialler to this Alarm System, it would be connected to the Internal Receiver, these Diallers would contact you by Telephone or Text Message if triggered.
Additional Receivers & Beams:
You can add Multiple Wireless Receivers (indoor & external solar) to this system (no limit) and many sets of additional Solar Perimeter Beams (3 sizes) plus a range of Sensors and a Smoke Detector.
Sirens:
You add loud Internal & External Wired or Wireless Sirens, Flashing Strobe Lights, Speech Alerts or activate Lighting from the internal Receivers or Diallers, please ask for advice.
This is a very versatile Alarm System which can be built into a system to suit your exact requirements, if you need help in choosing the correct components please contact us. 
If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm

Receiver:

  • 1 x 4-Channel Indoor Receiver.
  • 1 x Plug in Transformer. 
  • 1 x Rear Mouning Bracket.
  • 1 x Manual. 

Detection Beams:

  • 1 x Set of 2B Solar Powered Detecting Beams.
  • 1 x Set of Wall Mounting Brackets. 
  • 1 x Set of Pole Mounting Brackets.
  • 1 x Set of Instructions. 

Rechargeable Power Pack:

  • 2 x Rechargeable Power Packs.
  • 2 x 3-pin Plug in Chargers.
  • 2 x IP67 Plastic Boxes.
  • 2 x Snap Cable Connectors.

Receiver:

  • Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
  • Power Supply: 15v DC 1amp (plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Relay Output Type: Momentary N/O or N/C.
  • Wireless Working Range: 900 metres (line of sight).

 

Detection Beams:

  • Beam Size: 590 (H) x 123 (W) x 45 (D) mm.
  • Power Supply: Re-chargeable AA Batteries.
  • Charging Method: Built in Solar Panels.
  • Mounting Methods: Wall or Pole.
  • Detection Range: 100 metres.
  • Transmission Range: 900 metres (line of sight).
  • Frequency: 433 Mhz.
  • IP Rating: IP66.
  • Distance Between Detection Beams: 60mm.
  • Quantity of Built in Detection Beams: 2 sets.
  • Charging Port: 9 - 12v DC (500 m/A to 1 amp).
  • Built in Buzzer: Yes (turn on with 1 - 6 presses of button, off 7 or 8 times).
  • Buzzer OFF (7 with immediate reset, 8 with 3 minutes battery saving reset).


Easy Programming Method:

  1. Turn On Beams (switch on rear).
  2. Mount the Beams.
  3. Line up By Eye, String Line etc.
  4. Put the relevant Receiver into Learn Mode.
  5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
  6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
  7. Take the Receiver out of learn mode.
  8. The system is now ready.

Power Pack:

  • Connection to Beams: 90 degrees Push Connector.
  • Cable Length to Push Connector: 1.2 metre (could be lengthened upon request).
  • Charging Method: Remove from IP67 Box (simple connector inside box), and take away to Charge with Charger supplied.
  • Charging Time: Approx 6 - 8 Hours.
  • Beam Operation: Approximately 750 Triggers before Charging required.

Storage Box:

  • Material: Plastic.
  • 200 x 170 x 100 mm.
  • Weatherproof: Yes (IP67).
  • Lid: Hinged with Snap Connector.