Reduced price! Long Range Solar Powered SB Wireless PIR (900 metre operating range).

Long Range Solar Powered DA600+ Wireless PIR (900 metre operating range).

Ultra Secure

004-3610

New

Long Range Solar Powered Wireless Outdoor PIR which will work in conjunction with all DA600+ products, with an impressive Wireless operating range of 900 metres and detection range of 20 metres, very useful addition to these Alarms.  

More details

97,98 €

(including vat)

132,23 €

-25.9%

Visa
Mastercard
Sagepay
Paypal
100% Secure Payment
97% Customer Satisfaction
Technical Help-line
30 Day Money Back Guarantee

Long Range (900 metre) Solar Powered Wireless Outdoor PIR to work in conjunction with all DA600+ Alarm Receivers & Sirens, ideal as either:

  • An additional PIR Sensor working together with the Perimeter Alarm Beam System, when there are small particular locations that need protecting where a Beam would not be practical of cost effective.
  • As a standalone Wireless Outdoor or Driveway Alarm or Alert.  

Detection:

The Detection range is 20 metres (which can be reduced by choosing one of the other  three sensitivity settings) and the detection width is approximately 15 degrees but with a narrow depth.

By fitting the PIR about 1 - 1.5 metres from the ground, it is possible to avoid detecting small ground animals (providing you mount the PIR horizontal to the ground).

Wireless Range: 

The Wireless operating range back to all of the Receivers & Wireless Sirens is 900 metres (line of sight), which would normally equate to around 400 - 600 metres in most applications (once walls, outbuildings, bushes and trees are taken into account).   

The range can be doubled by adding a Signal Repeater to the system, a further 3 more could also be added, each one adding a potential 900 metre further range (depending on how they were programmed).

Power Supply:

The PIR is powered by a built in Battery which is charged and maintained by the Solar Panel supplied, this Solar Panel comes with its own mounting bracket and 1 metre of Cable which is plugged into the back of the PIR.

The benefit of having a separate Solar Panel is that it allows you to fit the PIR in the most suitable position for Detection whilst positioning the Solar Panel in the best location for daylight (to charge the PIR).

You could also connect a charger into the back of the PIR for locations with access to power, or use this port to give the PIR an occasional boost charge if it is mounted in a shady location.

Mounting Bracket:

The PIR is supplied with an easy to mount wall bracket.

Size:

The PIR measures 130 (w) x 90 (h) x 130 (d) mm making it easy to hide away in the installation.

A very useful addition to our Solar Powered Wireless Outdoor Alarms, please Contact Us should you have any questions !! 

Please Note: Work in conjunction with all DA600+ products !!

If you need assistance in selecting the right product for your personal needs or support after making a purchase, please do not hesitate to contact us:
Contact us
Our opening times: Monday-Friday 8:00am-5:00pm
  • 1 x Wireless PIR.
  • 1 x Built in Battery.
  • 1 x Solar Panel with 1 metre of Cable.
  • 2 x Mounting Brackets.
  • Power Supply: Built in 3.3v LiFEPO4 Battery (500 mAh).
  • Charging Method: Separate Solar Panel.
  • Wireless Range: 900 metre (line of sight).
  • Detection Range: 20 metres (adjustable).
  • Detection Angle: 15 degrees.
  • Size of PIR: 130 (w) x 90 (h) x 130 (d) mm.
  • Size of Solar Panel with Bracket: 190 (w) x 155 (h) x 130 (d) mm.
  • Frequency: 433 MHz.
  • Working Temperature: -30 - +70 Degrees.
  • Solar Panel Output Current: 200mA (bright days).
  • Sensitivity Settings: 3.
    • Low Setting: Press ON/OFF Button 3 times to Turn ON.
    • Medium Setting: Press ON/OFF Button 4 times to Turn ON.
    • High Setting: Press ON/OFF Button 5 times to Turn ON.