Extra Long Range (1800 metre) Warehouse Wireless 'S' Bell System

Extra Long Range (1800 metre) Warehouse Special Wireless 'S' Entry Bell System supplied with a Heavy Duty Push Button (with please ring etched onto it) and a Loud Bell.

The system includes a Plug in Signal Repeater which extends the signal from 900 metre to 1800 metre (line of sight), which can be extremely useful in Warehouses & Commercial buildings full of stock, walls & general obstructions.

Popular in many applications including:

• Warehouses.
• Schools.
• Factories.
• Farms & Rural Businesses.
• Large Homes.
• External Home Offices.
• Workshops.

The transmission range between the Battery powered Wireless Transmitter and the plug in Wireless Bell is an impressive 1800 metres (line of sight) using the Signal Repeater, which equates to around 900 - 1400 metre in most applications, this can still be increased by adding further Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Receiver is powered by a plug in Transformer and has a built in chime (with adjustable volume), this is connected to a 85 Decibel Bell by 3 metres of cable (this can be lengthened or shortened upon request), the Bell is fully weatherproof therefore can be fitted inside a Warehouse or in the Yard. 

Typical installations would have the Receiver inside a Warehouse Office and the Bell fitted in the Warehouse.

When the Push Button is pressed, a Wireless Signal will be transmitted to the Signal Repeater (which can be within 900 metres (line of site) which will then relay the signal a further 900 metres (line of site) to the Receiver.

The Receiver will activate the built in Chime/Buzzer and the Wired Bell, the standard duration options for the Bell activations are from 10 - 60 seconds or 5 minutes.

When the system is required, you simple turn the Internal Receiver OFF.

Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

1. Mount the H/D Push Button.
2. Mount the Battery Transmitter & Box (4 x Screws).
3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post.
4. Mount the Signal Repeater (approximately halfway between the transmitter and receiver) and connect the 3-pin Power Supply into a suitable wall socket.
5. Mount the Plug in Receiver & Connect the 3-pin Plug into a Wall Socket.
6. Mount the Bell.
7. You may need to Remove the Cable between the Receiver & Bell to guide it through a hole in a Wall or Post.
8. Either Cable can be lengthened or shortened during the Installation using simple 2-core Bell Cable.

Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

• Additional Push Buttons & Transmitters.
• Simple Handheld or Wall Mounted Internal Push Buttons.
• Additional Receivers.
• Additional Bells.
• Loud Wired Sirens.
• Wired Buzzers.
• Wired Adjustable Sirens.
• Flashing LED's.
• Signal Repeaters.

These Wireless Bell System could also be used for other uses including:

• Staff Call Systems.
• Staff Panic Alarms.
• Intruder Alerts.

Please Contact Us for Friendly, No Obligation Advice !!

Very Easy & Quick to Install !!

• 1 x H/D Push Button.
• 1 x S Transmitter & Mounting Box.
• 1 x Plug in Receiver.
• 1 x Wireless Signal Repeater.
• 2 x 3-pin Plug in Transformers (2-pin available upon request).
• 1 x 85 Decibel Bell.
• 2 x 3 metre Bell Cable. 

Wireless Receiver:

• Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Supply: 15v DC 1amp (3-pin plug in transformer).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Available Channels: 4.
• Max sets of Beams per Channel: 32.
• Maximum sets of Detectors per Receiver: 128.
• Output Voltage: 12v DC.
• Output Voltage Duration: 1, 10, 60 second & 5 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Wireless Working Range: 900 (line of sight).

Wireless Transmitter:

• Wireless Range: 900 metres (line of sight).
• Power Supply: 1 x MN21 12v Battery.
• Push Buttons: One.
• Frequency: 433 Mhz.
• Size: 90 x 40 x 15mm.
• Colour: White, Grey & Red Button.
• Optional Cable Connection: Yes.

Transmitter Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 195 (L) x 90 (W) x 45 (D) mm.
• Internal Size: 133 (L) x 83 (W) x 35 (D) mm.

Bell Specification:

• Power Supply: 12v DC.
• External: Yes.
• Size: 150 mm Diameter x 60 mm Deep.
• Mounting Bracket: 4 x Holes.
• Volume: Approx 85 Decibel.

Push Button Specification:

• Size: 85mm (L) x 40mm (W) x 40mm (D)
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Words: Please Ring.

Signal Repeater:

• Wireless Range: 900 metres (line of sight).
• Power Supply: Plug in 3-pin Transformer (2-pin available).
• Frequency: 433 Mhz.
• Size: 160 (w) x 160 (h) including Aerial x 55 (d) mm.