Wireless Commercial Bell Kit inc H/Duty Push Button & Loud Bell (adjustable duration) & Additional Chime Receiver

Push Button:

The Heavy Duty Steel Push Button (with Please Ring embossed onto it) is connected to a Battery Powered Wireless Transmitter (which is located inside a plastic box) by 3 metres of Cable. This allows you to fit the Push Button into the most desirable location and the Transmitter into a safe location suitable for wireless Transmission.

The Transmission range between the Transmitter & Wireless Receiver is an impressive 800 metres (line of sight), which equates to around 400 - 600 metres in most applications.

The Wireless Transmitters are powered by a 3v CR123A Battery (supplied) which would last 12 - 18 months in most applications.

Additional Push Buttons & Transmitters can be added to cover different entrances, please Contact Us for Advice !! 

How it Works:

• 1 x Outdoor Receiver (P800-WSR/1) & Power Supply.
• 1 x Remote Control (P800-WSK/1).
• 2 x AAA Batteries.
• 1 x MT Transmitter (in a box).
• 1 x Heavy Duty Push Button (embossed with Please Ring) & 3 metres of Cable.
• 1 x Set of Screws.
• 1 x 85 Decibel Bell.
• 1 x Chime Receiver & Power Supply.

Outdoor Receiver:

• Weatherproof: Yes.
• Power Supply: 12v 5 amp DC.
• Weatherproof Cable Entry Glands: Yes.
• Channels: 2.
• Sensors per Channel: 4.
• Operating Range: 800 metres (line of sight).
• Arming & Disarming Method: Remote Control.
• 12v DC Outputs: 2.
• Output Duration:
• • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).
• Duration Selection: Internal Dip-switches.
• Frequency: 869.400 – 869.650 MHz.
• Size: 170 x 125 x 60 mm.

Remote Control:

• Operation:
• Channel 1 Arm, Disarm & SOS.
• Channel 2 Arm, Disarm & SOS.
• Power Supply: 2 x AA Batteries (supplied).
• Size: 85 x 40 x 25 mm.
• Transmission Range: 800 metres (line of sight).
• Multiple Remote Control Operation: Yes (no limit).
• Feedback Indicator: Yes (it confirms a successful operation).
• Frequency: 869.400 – 869.650 MHz.
• Wall Bracket: Yes (supplied).

Push Button:

• Size: 85 (L) x 40 (W) x 40 (D) mm.
• Contact Type: NO or NC.
• Sealed Wired Contacts.
• Laser Etched Legend; Please Ring.
• Weatherproof: Yes.
• IP 67.

Transmitter:

• Wireless Range: 800 metre (line of sight).
• Power Supply: 1 x 3v Lithium CR123A Battery.
• Battery Life: 12 - 18 months (most applications).
• Size: 65 x 33 x 15 mm.
• Activation Methods:
• Wired Input: Yes (N/O Momentary Volt Free, when used as a circuit board).

Mounting Box:

• Material: Plastic.
• Weatherproof: IP65.
• External Size: 150 (L) x 85 (W) x 34 (D) mm.
• Internal Size: 106 (L) x 76 (W) x 28 (D) mm.
• Label: V range.

Chime Receiver:

• Wireless Operating Range: 800 metres (line of sight).
• Adjustable Volume: Yes (from low to approximately 85 decibel).
• Melody Options: 32.
• Power Supply: 3-pin UK & 2-pin European Transformer Supplied.
• Battery Back Up: Yes 4 x AAA Batteries (not supplied).
• Loss of Mains Power Notification: Yes (LED).
• Low Battery Notification: Yes.
• Maximum Number of Detectors Can Be Used: 16.
• Multiple Receivers can be used: Yes (no limit).
• Zone Indicator: Yes (visual and by chime).
• Dry Relay Outputs: 4 (N/O & N/C Momentary).
• 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
• Relay Duration: Momentary.
• Mounting Method: Wall or Desk Mounted.
• PIR Battery Check: Yes.
• Optional Pause Modes: Yes.
• Input Voltage: 12v DC 500 mA.
• Frequency: 869.400 – 869.650.