Unique Vehicle Detecting Battery Powered Covert 4G Alarm

Vehicle Detecting 4G Alarm (unique to Ultra Secure):

• Detects Moving Steel (vehicles or moving steel gates).
• 4G (contacts owners by Phone & SMS).
• Avoid False Alarms from Animals.
• Battery Powered.
• Remote Locations.
• Fully Covert.

• 1 x Outdoor Battery Powered Vehicle Detecting Probe with 14 metres of Cable.
• 1 x Outdoor Battery Powered UltraDIAL 4G Dialler.

How it Works:

The Probe is designed to be hidden under a grass verge (or in a hedge) parallel to the Road or Entrance being protected, or even placed just underground near a opening Steel Gate.

The probe is connected to a Battery Powered Control Panel by 14 metres of cable (which should be covered up and protected during the installation), the Control Board would be fitted into a covert location (for example on the back of a post of fence panel).

Connected to this control board (by a short length of cable which can be extended) is our unique Weatherproof Battery Powered 4G UltraDIAL Alarm Dialler.

When triggered the UltraDIAL will silently contact up to 3 keyholders by Phone or Text (or both).

It is Armed & Disarmed using one or more Remote Controls from up to 50 metres away, allowing you to choose when the Alarm is Armed.

If the hidden Probe Detects moving Steel (vehicle or steel gate being opened) whilst the UltraDIAL is Armed, it will then Silently Contact Keyholders (one or more wireless Solar Sirens could be added if desired).

The Protect-800 control board also transmits a wireless signal up to 800 metres away (line of sight) which equates to around 400 - 600 metres in most applications, this may be ideal if you also have a building (with a power supply) nearby that would benefit from having an Indoor or Outdoor Receiver (perhaps for only certain times of the day).

The optional Indoor Receiver has built in Chimes and can trigger 12v accessories (could be useful in an office or home), the Outdoor Receiver is designed to operate 12v Floodlights, Sirens, Bells etc for selected durations (could be useful in all types of applications).

Probe:

There is sensitivity adjustment on the Transmitter Board allowing you to fine tune your Alarm.

'The 4G UltraDIAL' is powered by 3 x Lithium AA Batteries (supplied) and is rated to IP66 for full weather protection.  

Supplied with 1 x Remote Control, additional ones can be added.

Contacting Key-holders:

The Alarm will contact between 1 & 3 key-holders (depending on how you have chosen to program the alarm) by Telephone & SMS (either can be turned off whilst programming the alarm) when activated.

It will normally take take between 30 - 60 seconds to call the first key-holder when triggered as it is designed to sit in a partial sleep mode (this is how we manage to get up to one years battery life from a 4G Dialler).

Recording Message:

You can record a 30 second message into the Alarm, which will be replayed to the key-holders when the Alarm calls them.

Receiving a Call:

When the Alarm calls the key-holders, there is the choice to:

• Listen to your pre-recorded message and do nothing (the alarm will contact the other key-holders).
• Listen to your pre-recorded message and press # on your telephone (this will disarm the UltraDial and prevent it from calling further key-holders).
• Listen to your pre-recorded message and press * on your telephone (this will prevent it from calling further key-holders, but keep the Alarm fully armed (ready for further activations).

Easy Programming:

It is very easy to program, probably the easiest 4G or GSM Alarm to program on the market today by using the small built in keypad, following some very simple instructions.

Low Battery:

The Alarm will send the primary key-holder a SMS (text message) if the batteries are getting low.

Security Screws:

The lid is fitted with 4 x security screws and a tool is supplied as standard.

Arming & Disarming:

The Alarm is Armed & Disarmed by using the Remote Control from up to 50 metres away, up to 9 Remote Controls can be used with each Alarm. 

Wireless Alarm Detectors:

The UltraDIAL can also be used with a range of Wireless Detectors up to 50 metres away which may be useful if you have a nearby small building to also protect (such as a tool shed).

These include:

• Battery PIR's with Built in Sirens (007-0200).
• Battery PIR's with a Hood & Siren (007-1410).
• Battery UltraPIR's, can be used without the SIM Card but in Silent Mode (007-1150).
• Battery UltraPIR's with a Hood used without the SIM Card in Silent Mode (007-1400).
• Battery Wireless Door Contact (007-0260).

SIM Cards:

The UltraDIAL communicates via the mobile phone networks (nano sim card required).

It will contact up to three key-holders by Telephone (with your own pre-recorded message) & Text Message when activated.

We do offer two Roaming SIM Cards from a third party supplier (at cost) designed for use in Alarms & Tracker Systems, these are low level contract sim cards (working on a direct debit) operating over all the major UK Networks ensuring your Alarm has the best signal available in all locations. 

These can be selected within the drop down options near the Add to Card Button.

The two options are our 20 Plan (click here) & 50 Plan (click here), please click the links to read all about them.

You can also purchase the product with no sim card and simply use your preferred supplier (many options are available).

Please Contact Us for any Advice !!