Wireless alarm DA600+ siren control panel with latching 118 decibel siren & blue flashing LED

DA600+ Long Range Wireless Alarm Siren Panel with a built in Latching 118 Decibel Siren & Blue Flashing LED, mainly used in Panic & Safety Alarms.

Please Note: This Panel requires a wireless or wired reset button (contact us for advice).

The transmission range from a suitable Transmitter is from 300 metres to 900 metres (line of sight) depending on which transmitter is chosen (most are 900 metre), this can be at least doubled by adding the Signal Repeaters (004-2910).

There are many Transmitters that can be used with this Wireless Siren Box, these include:

• 900 metre Single Push Button (006-2200).
• 900 metre Single Push Button & Lanyard (006-2220).
• 900 metre Double Push Button (006-2210).
• 900 metre Double Push Button & Lanyard (006-2230). 
• 300 metre Under Desk Button (004-2940).
• 900 metre Large Red SOS Wireless Push Buttons.
• 900 metre Large Red Lockdown Wireless Push Buttons.
• 900 metre Large Red Help Wireless Push Buttons.
• 900 metre Large Red Assistance Wireless Push Buttons.
• 900 metre Please Ring Wireless Push Button Assembly (006-2800).
• 1B - 2B - 3B Perimeter Beams.
• 900 metre & 600 metre PIR's.
• Internal Curtain & Standard PIR's.

The loud 6-tone 118 Decibel Siren Assembly is powered by a plug in transformer, which can be connected into a fused spur (recommended), we also offer the option of including a Back Up Power Supply for applications wanting to ensure the system works throughout a Power Cut, the UPS would be separate to the Siren Box.

Compatible with all DA600+ Wireless Alarms !!

Operation:

In the event of a Panic Button or Alarm Detector being activated, the Siren & Flashing Strobe will latch ON and remain ON until the system is reset by using a Wireless or Wired Reset Button.

Additional Siren Boxes:

You can add as many Siren Control Boxes to your Panic or Lockdown Alarm to suit your requirements, each one can be adjusted to suit the exact location of its installation, you may wish to have some a very with low volume and a flashing LED whilst others set to be loud.

It is also possible to connect a wired Siren & Flashing Strobe Boxes to each Wireless Siren Box for applications where rooms may be back to back. 

Installation:

These Wireless Siren Alarm Panels are designed for easy installation, they will be fully prepare before  despatch, all the customer needs to do is:

• Mount the Control Box (handy lugs for easy & quick fitting).
• Pair the Box to the Panic Buttons (new systems would be done before despatch).
• Power the Control Box (we recommend a fused spur).
• Test.