HY Solar Wireless Siren House Alarm Kit 4 with Battery 4G Dialler

Solar powered Wireless Alarm Kit 4 supplied with a Battery powered 4G Auto-Dialler allowing you to protect a building (with No Power) with a Loud Siren & Flashing Strobe together with being able to contact Key-holders by Phone or Text.

This Kit (which can be used in many applications) includes:

• 1 x Solar Siren & Control Panel.
• 2 x HY Alarm Remote Controls (to Arm & Disarm the Siren).
• 2 x Wireless Magnetic Door & Window Contacts.
• 1 x Wireless Curtain PIR.
• 1 x Wireless Smoke & Heat Sensor.
• 1 x Battery Powered 4G UltraDIAL Auto-Dialler.
• 1 x 4G UltraDIAL Remote Controls (more can be added).

How to Install:

1. Pair the Contacts & Remote Controls into the Siren (we will do this for you when it is purchased as a kit).
2. Mount the Siren on the House wall (ideally on a South or East facing wall to help with the Solar charging of the Siren).
3. Mount the 2 x Magnetic Contacts on Doors/Windows & Frames (using double sided tape and small screws supplied) in a position that results in both parts nearly touching when the Door or Window are closed. 
4. Mount the Wireless Smoke & Heat Sensor into a suitable location.
5. Mount the Wireless Curtain PIR.
6. Fit a SIM Card into the GSM Auto-Dialler.
7. Mount the Auto-Dialler next to the Solar Siren (this can be moved if required by lengthening the cable between the Auto-Dialler & Solar Siren).

How it Works:

The Solar Siren & Control Panel is powered by a built in lithium battery which is charged and maintained by the top mounted Solar Panel, it also has a built in tamper switch should someone try to remove it. This Siren doubles up as the Alarm Control Panel and is Armed & Disarmed using the 2 x Remote Controls supplied (a further 6 could be added). 

The Siren would be fitted to the outside wall of your home (ideally on a South or East facing wall) using screws and wall plugs, no power supply is required.

The Magnetic Contacts (additional can be added), Smoke & Heat Sensor & Curtain PIR are connected to the Siren using a unique & secure Wireless code, when they are triggered a signal will be sent to the Siren, if the Siren is Armed it will trigger the loud multi tone 105 Decibel Siren & Flashing Strobe for a duration of 3 minutes.

The Siren can be turned off at any time using the Remote Controls, should you not be at home after 3 minutes it would stop but remain Armed.

There is no time delay, so you would turn the Alarm ON & OFF using the Remote Control (from inside or outside) before entering the premises.

Connected to this Siren by a short length of cable is our unique Battery Powered 4G Dialler (UltraDIAL), this is Armed & Disarmed by Remote Control supplied (more can be added).

The UltraDIAL is fully weatherproof therefore can be mounted next to the Solar Siren or fitted into a more suitable location for a GSM Signal if required (indoors or outdoors) by extending the Cable between the two.

When the HY Siren is triggered the UltraDIAL will contact up to three key-holders by Phone (with your own pre-recorded message) & Text Message (you can choose to turn either the Phone or Text Off if required).

When a key-holder receives a call, they can choose to press # (which will stop the UltraDIAL calling other key-holders and Disarm it) or press * (which will stop the UltraDIAL calling other key-holders but the UltraDIAL will Remain Armed).

Ideal for applications where there is a limited (or no) power supply, the loud Siren will notify anyone on site at the time, whilst the Dialler will also contact key-holders (ideal for when the building is empty).  

Smoke & Heat Sensor: 

The Wireless Smoke & Heat Sensor is powered by built in 10 year lithium battery and has a Transmission distance to the Solar Siren of 100 metres (line of sight) making it easy & quick to fit.

The Sensor detects both Smoke & Heat and is also dust & insect proof. and is designed to be Ceiling mounted. It would normally be programmed into a 24 hour mode making it active all of the time (but this can be changed if required).

Wireless Curtain PIR:

These Wireless Curtain PIR's create a very narrow detection beam (ideal for locating behind doors, bay windows, etc) without expanding into the room.

They are also ideal for locating above or to the side of a Door for customers wanting to monitor a particular Door or Room.

They have a 9 - 12 metre range (can be reduced) & 15 degrees detection pattern and a wireless range back to the receiver of 100 metres (line of sight). 

When mounted vertically, they will creates a very narrow beam (ideal for protecting bay windows, balcony applications & french doors), when mounted in a horizontal position, they create a wide detection pattern avoiding the ground and ceiling (ideal for buildings prone to small animals).

Being battery powered, they can be very easily installed into any location.

Magnetic Contacts:

The Wireless Magnetic Contacts are designed to be used on Doors or Windows, they are fitted into a position that when the Door or Window is closed both parts are nearly touching, if they are parted (by the door or window opening) a signal will be sent to the Alarm, if the Alarm is Armed then it will trigger both the Siren and 4G Dialler.

Accessories:

There is a wide range of accessories that can be added to this Alarm System, you can use up to 12 standard Alarm detectors (magnetic contacts, pir's etc) and 4 detectors that are always turned ON (smoke & panic buttons etc), these include:

• Magnetic Contacts.
• Standard PIR's.
• Pet Friendly PIR's (will not detect combined animals under 10 kilo).
• Remote Controls.
• Smoke & Heat Detectors.
• Smoke Detectors.
• Panic Buttons.
• Vibration Sensors.
• Outdoor PIR's.
• Curtain PIR's.
• Roller Shutter Door Contacts.

There are many other accessories available, please contact us for advice.

The Wireless Range between the Siren and accessories is 100 metres (line of sight) which equates to around 40 - 60 metres in most applications (this can be doubled by adding a signal repeater).

SOS:

The Remote Control also has a SOS Button on it, allowing homeowners to trigger the Siren at any time from inside or outside the property.

SIM Cards:

The Alarm uses a nano size SIM Card (PAYG or Contract), the Dialler will operate with all major Networks (and we do recommend using one purchased from the Country the Alarm is to be used), no Data is required.

You can also choose to include a SIM Card in the drop down above with this order, the options are 20 plan or 50 plan (click this link to find out full information).

An ideal Alarm for customers wanting to protect Buildings with No (or limited) Power Supply, including:

• Barns.
• Workshops.
• Garages, Sheds
• Cabins.