Complete 2B-100 Solar Wireless DA600+ Perimeter Alarm Kit with 4G Dialler & Wired Weatherproof Siren

A Complete Wireless DA600+ Perimeter GSM Alarm Kit supplied with:

• 4 x sets of Long Range Solar Powered Wireless 2B Perimeter Beams.
• 1 x Wireless Receiver.
• 1 x KP9 4G Auto-Dialler & 2 x Remote Controls.
• 1 x Loud (118 Decibel) Weatherproof Wired Siren & 3 metres of Cable.

Compatible with all DA600+ Products !!

A complete Perimeter Alarm System to help you Monitor & Secure your Home & Business, ideal for DIY Installation (but can be expanded even more if required).

How it Works:

The 4 x sets of Beams are mounted to cover your Perimeter or vulnerable parts of your Perimeter, the Receiver & Dialler are normally located inside your Home, Garage, Office (any internal location with Power and a mobile phone signal).

If a person or vehicle passes through any of the Beams when the Dialler is Armed, the Internal Receiver will Chime, the Dialler will activate a built in Siren and the Wired Siren (for the pre-set durations) together with contacting Key-holders by Phone & Text.

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

• 4 x Adjustable Dry Relay N/O or N/C Outputs (often used to trigger auto-diallers, timer relays).
• Adjustable 12v DC Outputs (often used with sirens & flashing lights).
• ON/OFF Switch.
• 5 minute Exit Delay (using the remote controls or receiver).
• Volume Control.
• Will work with up to 128 sets of Detectors.
• Optional Reminder Bleeps.
• Exit Delay Option.

4G KP9 Auto-Dialler:

The KP9 4G Auto-Dialler is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a nano sized SIM Card needs to be fitted (not supplied but is available in the drop down above), you can use either PAYG or Contract.

The Dialler is packed full of features normally only associated with much more expensive systems including:

• 2G, 3G & 4G.
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Simple Plug in Power Supply with Back up Battery.
• Transformer Rating: 12v DC 1 amp.
• Can be used with a Wireless Siren (H/Duty).
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
• 2 x Wired Input Zones.
• 95 x Wireless Zones.
• Built in Power Failure (optional).
• Built in Temperature (optional).
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• Optional APP (iOS or Android).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).

The secret to using a 4G Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, so if the Dialler is Armed the Alarm is Armed, if Disarmed the Alarm is OFF (although you can choose to use the built in chime on the wireless receiver to give a useful Alert).

The Dialler can be controlled by the following methods:

• Built in Keypad.
• Remote Control.
• Text Message.
• Built in Timer.
• APP.

Siren:

This Perimeter Alarm is supplied with a very loud 118 decibel 6-tone Siren and 3 metres of Cable (which can be easily extended), the Siren is connected into the KP9 4G Dialler, and would only work if the Dialler is Armed.

The 4G Control Panel can also in different ways helping you a return on the investment, examples below:

• Wireless Internal Burglar Alarm.
• Wireless Smoke Alarm.
• Temperature Monitor.
• Power Failure Monitor.
• Door Bell.
• 2-way Communication.
• Water & Flood Monitor.

You can add many additional accessories to this Perimeter Alarm system to suit your application including:

• Additional Perimeter Beams.
• PIR's & Door Contacts.
• External Wired & Wireless Sirens.
• Internal Sirens & Buzzers.
• Speech Alerts.
• Relays (for lighting).
• Flashing Lights.

If you require advice when building your system, please Contact Us for Friendly, No Obligation Advice !!

Wireless Receiver Specification:

• Size: 160 (W) x 105 (H) x 35 (D) mm.
• Power Input: 12 - 15v DC 1 amp.
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• ON/OFF Button: Yes.
• Adjustable Volume Control: Yes.
• Channels: 4.
• Max sets of Beams per Channel: 32.
• Output Voltage: 12 - 12v DC.
• Output Voltage Duration: 2 seconds to 10 minutes.
• Built in Chimes: Yes (one per channel).
• Reminder Bleep: Yes (if programmed).
• Exit Delay: Yes 5 minutes (if programmed).
• Frequency: 434.6 MHz.
• Standby Current: 20 mA.
• Alarm Current: 180 mA.
• Relay Rating: 24v DC or 120v AC (2 amp).
• Relay Output Type: Momentary N/O or N/C.

KP9 GSM Dialler Specification:

• 95 Wireless Channels (can be used with additional internal accessories).
• Contacts up to 9 x Key-holders by Telephone & Text Message (optional).
• Built in Siren (adjustable duration from 1 to 999 seconds).
• Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
• Transformer Rating: 12v DC 1 amp.
• Back up Battery: Yes.
• Easy to Program (using the built in keypad and LCD Screen or APP).
• Easy to Operate using:
  • Remote Control.
  • Built in Keypad.
  • Built in Timer.
  • Text Message.
  • APP.
• Many Modes of Operation including:
  • Full Arm.
  • Home Arm.
  • Entrance.
  • On Site.
  • Outer.
  • Inner.
  • 24 Hour (with Siren).
  • 24 Hour (silent).
  • Not in Use.
  • Doorbell.
• 2 x Wired Input Zones.
• Built in Power Failure (adjustable 0 - 99 minutes).
• Built in Temperature (optional).
• Optional Wireless External Sirens. 
• 2 x way Communication.
• Log (history) Logging.
• Low Battery Warning (of accessories).
• 12 Language Menu (including English, French, German, Italian, Dutch & Spanish).
• Size: 190 (W) x 130 (H) x 25 (D) mm.
• GSM Frequency: FDD-LTE: B1/3/5/7/8/20 TDD-LTE: B38/70/B41 WCDMA: B1/5/8.
• GSM: 900/1800 (2G, 3G & 4G Networks).
• This Alarm operates on 2G, 3G & 4G Networks !!
• Wireless Accessories Frequency: 433.92 Mhz.
• Digital Output: N/O or N/C Dry Contacts (3A/240 AC).
• Sim Card Size: Nano Size.
• Built in Temperature Monitor: Yes (-20 - + 60 C).
• Back Up Battery: 3.7v-900mAH Li-ion Rechargeable.
• Colour: White.
• Push Buttons: Touch.
• Android APP: Yes.
• iOS: Yes.

Beam Specification:

• Size: 340 (H) x 123 (W) x 45 (D) mm.
• Power Supply: Re-chargeable AA Batteries.
• Mounting Methods: Wall or Pole.
• Detection Range: 100 metres.
• Transmission Range: 900 metres (line of sight).
• Frequency: 433 Mhz.
• IP Rating: IP66.
• Distance Between Detection Beams: 60mm.
• Qty of Detecting Beams: 1 set.
• Protected Height: 
• Charging Port: 9 - 12v DC (500 m/A to 1 amp).

Siren:

• Current Rating: 310 mA.
• Voltage: 12v DC.
• Length: 101 mm.
• Width: 96 mm.
• Sound Level: 118 dB.
• Colour: Black.
• Tone: 6-tone.