Disabled Toilet Long Range Wireless (800 metre) Alert System (Protect 800)

Long Range Wireless (800 metre) Disabled Toilet Alert System, comprising of a Wireless Pull Switch & Wireless Receiver. 

Ideal for fitting the Receiver into a nearby Reception area or Office to help monitor the Disabled Toilets.

How it Works:

If the Pull Switch is activated, a long range Wireless Signal will be transmitted to the 4-channel Indoor Receiver which has a choice of 32 Chimes & Sirens with Volume control (from zero to 85 decibels) and LED Notification.

You can add up to 15 additional Wireless Pull Switches (or other transmitters) to this Receiver together with unlimited additional Receivers (which could be located in different rooms).

This is ideal for when you want to monitor the Disabled Toilets from nearby locations.

Wireless Range:

The Wireless operating range between the Pull Switch & Receiver is an impressive 800 metres (line of sight) which equates to around 400 - 500 metres in most applications.

Illuminated LED: 

Once the pull cord is pulled, the Red LED will Illimited to show activation. This clear and visual cue serves as a reassurance, confirming activation, and ensuring help is on the way.

Receiver:

The Wireless Receiver is powered by a plug in transformer (supplied) and has:

• Volume Control (from zero to approximately 85 Decibels depending on which chime is chosen).
• 4 Channel (will indicate which channel has been activated).
• Simple ON/OFF Button.
• 32 Chime Options (can be different with all transmitters).
• 12v DC Output (can be used to trigger Flashing LED's, Siren's, Bells etc).
• 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
• Option to fit AAA Back up Batteries (for applications prone to power cuts).
• Can be Wall or Desk Mounted.
• Mains Powered using a Plug in Transformer (3-pin UK & 2-pin European supplied).
• LED Notification of Loss of Mains Power.
• Low Battery Notification.
• Up to 16 Transmitters could be used.
• Multiple Receivers can be used (no limit).
• Zone Indicator (visual and by chime).
• Dry Relay Outputs (can be used to trigger Diallers, Flashing LED's, Siren's, Bells etc).
• Push Button Check.

Pull Switch Assembly:

The Wireless Pull Switch is powered by a built in CR123A Battery (making it very easy to locate) which will operate for between 12 - 18 months in most applications.

It is supplied to be ceiling mounted and comes with 2 metres of cord which can easily be shortened to suit the application.

The maximum number of Pull Cords or other Protect 800 Transmitters that can be used is 16.

Installation:

The Receiver can be desk or wall mounted and is powered using the transformer supplied into a suitable socket, 4 x AAA batteries can be inserted should you want battery backup.

The Pull Switch is fitted Firmly onto the Ceiling using suitable fixings (not supplied as surfaces will vary). 

A Disabled Toilet Alert with Long Range Wireless Operation for specific applications. 

If you need further advice, please ASK !!

• 1 x Protect 800 Pull Switch Assembly (009-4220).
• 1 x Protect 800 Receiver (004-4110).